Facts to Know About HP DeskJet Plus 4152

Hewlett-Packard, better known as HP, has been in the printing game for quite a long time. HP launched its first printer in 1984, and since then, it has manufactured various models. To keep up with the changing trends, HP keeps incorporating new features into their printers without compromising quality. This makes the HP printers more appealing to the public, but as we all know, not all printers are created equal.

If you plan on purchasing HP DeskJet Plus 4152, you should first go through the content of this blog. This blog contains all the information about DeskJet Plus 4152, including its features, setup, and more.

DeskJet Plus 4152: Overview

Deskjet Plus 4152 is an all-in-one printer designed for home and office use. It is specially engineered to meet the highest standards of quality and reliability. So, you can get hassle-free experience printing, copying, and scanning everyday documents. In the box, along with the printer, you get two HP 67 Setup Instant Ink Ready cartridges (black and tri-color cartridges), a power cord, and a setup guide.

The printer measures 13’’x16.85’’x7.87" and has a flatbed design for scanning and copying. It also comes with a 35-page automatic feeder. Deskjet Plus 4152 has a built-in USB port for a more reliable connection and Dual-band Wi-Fi. HP DeskJet Plus 4152 All-in-One Printer has a printing speed of 9.1 PPM. It can print up to a maximum paper size of 8’x14".

DeskJet Plus 4152: Setup Process

The HP DeskJet Plus setup process is simple, but if you are a first-time user, you will require some help. We will guide you through each step to avoid getting stuck at any point. These steps are straight and easy to understand, so you won't have any problem following them.

Step 1: Unboxing and Setting Up the Printer

First, remove the printer from the box and place it on a clear, flat surface with easy access to a power outlet. Get rid of all packing materials from the outside of the printer. Lower the output tray and open the ink cartridge's access door to clean the printer from the inside. Remove any packing materials, such as tape and cardboard, from the cartridge access door. Then Close the ink cartridge access door.

Step 2: Installing HP Smart App and Adding the Printer

Before installing software, the printer must be turned on. Connect one end of the power cord rear of the printer and another end to an electrical outlet. Then, hit the power button. You will need the HP Smart app to connect and print from any device. Depending on your device, you can easily download the app from the Microsoft Store, Mac Store, or Google Play. Once you've downloaded and installed the software to add your HP printer, follow the steps mentioned below:

1. Launch the HP Smart app; if you use the app on the device for the first time, you will be prompted to sign into your HP account or create one.
2. Next, select Add a New Printer or the Add icon.
3. Then, the app will start searching for your printer.
4. Follow the on-screen instructions to connect the printer to your device.
5. You may be prompted to sign up for HP+ or Instant Ink during setup.
6. Follow the animations to load paper in the HP Smart app and install the setup cartridges.

Step 3: Load Paper

1. Lift the input tray at the back of the printer and slide the paper width guide to the left.
2. Then, load a stack of plain white paper into the input tray.
3. Next, move the paper width guide to the right until it lies at the edge of the paper.
4. Then, lower the output tray and pull out the tray extender.
5. Lastly, load the plain paper to perform a cartridge alignment.

Step 4: Install the HP DeskJet Plus 4152 Ink Cartridges

You can use your printer to perform printing jobs only after installing and aligning your ink cartridges. To install the ink cartridges:

1. First, open the ink cartridge access door.
2. Take out the black ink cartridge from its package.
3. While holding the cartridge by its sides, remove the plastic tape.
4. Then insert the cartridge back into its slot. Gently push it until it snaps into its place. The exact process applies to the color cartridge.
5. Next, close the ink cartridge access door.
6. The printer will print a set of information pages, including an alignment page.
7. Raise the scanner lid and place the alignment page print-side down on the scanner glass.
8. Then, lower the scanner lid.
9. To scan the alignment page, press the Start Copy Color button.

DeskJet Plus 4152: Replacing the Ink Cartridges

Original HP ink cartridges offer the reliability that you expect from HP. The original HP ink cartridges deliver sharp text and vibrant graphics. With the instant Ink delivery service, the printer can order ink for when the printer is running low on ink so that you can enjoy uninterrupted print quality. The replacement ink cartridges will cost you around $19.95. The replace the ink cartridges with new ones, follow the steps mentioned below:

1. Turn on your printer and open the output tray.
2. Then, open the printer ink access door.
3. The ink cartridge's carriage will shift automatically; wait until it becomes idle.
4. Next, gently push down the ink cartridge and pull it out.
5. Take out the new ink cartridge from its package.
6. Hold the cartridge by its sides and remove the plastic tape.
7. Then insert the cartridge into its respective slot. Gently push it until it snaps into its place.
8. Lastly, close the ink cartridge access door.